Cat6A STP Toolless RJ45 Keystone Jack with Cable-Tie-Free Design | CRXCONEC
The CRXCONEC Cat6A STP Toolless RJ45 Keystone Jack is designed for high-density patch panels and 4-pair Power over Ethernet (4PPoE) in structured cabling systems. Its pre-lock IDC cap holds conductors in place, and integrated cable retention secures the cable without a cable tie. The jack supports T568A/B wiring, 22–24 AWG solid conductors, and 5.0–8.5 mm cable outer diameters. GHMT independently verified Cat6A STP component performance. A dedicated pressing tool is recommended for final IDC cap closure. The IDC housing-wall design enhances the jack's insulation performance during high-potential (Hi-Pot) testing. CRXCONEC with more than 30 years of structured cabling manufacturing experience, specializing in custom RJ45 keystone jacks, patch panels, patch cords, fiber patch panels, and FTTH solutions. Fast to assist you in branding end-to-end copper and fiber cabling solutions.
Cat6A STP Toolless RJ45 Keystone Jack with Cable-Tie-Free Design
PN. CC-04-00403
Cable-Tie-Free Cat6A Jack for High-Density Patch Panels and 4PPoE
The CRXCONEC Cat6A STP Toolless RJ45 Keystone Jack is designed for high-density patch panels and 4-pair Power over Ethernet (4PPoE) in structured cabling systems. Its pre-lock IDC cap holds conductors in place, and integrated cable retention secures the cable without a cable tie. The jack supports T568A/B wiring, 22–24 AWG solid conductors, and 5.0–8.5 mm cable outer diameters. GHMT independently verified Cat6A STP component performance. A dedicated pressing tool is recommended for final IDC cap closure. The IDC housing-wall design enhances the jack's insulation performance during high-potential (Hi-Pot) testing.
Detailed Information For Buyers
| Part Number | CC-04-00403 |
|---|---|
| Product Type | Cat6A shielded (STP) toolless RJ45 keystone jack |
| Wire Compatibility | 22–24 AWG solid conductors |
| Cable Outside Diameter | 5.0–8.5 mm |
| Wiring Schemes | T568A / T568B |
| Cable Retention | Built-in cable retention; no additional cable tie required |
| PoE Application | Designed to support 4PPoE installations |
| Independent Testing | GHMT laboratory: Cat6A STP component performance verified |
| Recommended Installation Tool | CRXCONEC CC-15-00031 shared pressing tool or CC-15-00154 dedicated tool, for fully seating the IDC cap |
International Standard Compliant
| ISO/IEC 11801-1 | Class D/E/EA structured cabling |
|---|---|
| IEC 60603-7-1 | Connector dimension and reliability requirements |
| ANSI/TIA-568.2-E | Twisted-pair copper cabling performance |
| IEEE 802.3bt Type 4 PoE++ / 4PPoE | 100 W applications |
| IEC 60512-99-002 | Connector testing for remote power applications |
| UL1863 | Communications-circuit accessories |
| RoHS / REACH | Compliant, as specified in the supplied datasheet |
Standards, Wiring & Third-Party Verification
The CC-04-00403 supports T568A and T568B termination schemes and is designed for Cat6A STP structured cabling and 4PPoE applications. Its Cat6A STP component performance has been verified through third-party testing at GHMT laboratory. For project approval or brand qualification, request the applicable test report and confirm the precise test scope and referenced standards.
Product Features and Benefits
- Pre-lock IDC cap — Holds conductors in position before final closure to support faster, more consistent field termination.
- Enhanced Hi-Pot insulation design — The IDC housing-wall structure is designed to improve insulation performance.
- Toolless T568A/B termination — Supports either wiring scheme without a conventional punch-down tool. Use the recommended easy pressing tool for final IDC cap closure.
- Cable-tie-free retention — Integrated cable fixing removes the additional cable-tie installation step.
- High-density patch-panel fit — Designed for space-conscious copper port layouts; confirm panel opening and rear clearance.
- 4PPoE application support — Intended for four-pair PoE deployments when used with an appropriately designed cabling channel.
- Wide cable fit — Accepts 22–24 AWG solid wire and cable O.D. from 5.0 to 8.5 mm.
- Recommended easy pressing tool — CRXCONEC recommends its specially designed pressing tool to ensure the IDC cap is fully seated and securely closed during final termination.
- GHMT third-party verification — Cat6A STP component performance tested by an independent laboratory.
- 360° Shield Contact Design — Provides all-around contact between the cable shield and the keystone jack's shielded housing, helping maintain shielding continuity and reduce exposure to electromagnetic interference (EMI) when properly terminated.
Pre-Lock IDC Cap Simplifies Field Termination
In repeated patch-panel installations, keeping wires correctly positioned before closing the jack can help reduce rework. The pre-lock IDC cap is designed to hold the prepared conductors in place during assembly, making the termination process more manageable for T568A and T568B cabling projects. Although a conventional punch-down tool is not required, CRXCONEC recommends using its specially designed easy pressing tool for final closure to ensure the IDC cap is pressed fully into position.
Cable-Tie-Free Installation with Built-In Retention
Conventional installation methods may involve an additional cable-fixing step. The CC-04-00403 integrates cable retention into the jack design, eliminating the need for a separate cable tie at the connector. This can reduce accessory use and simplify repetitive termination work across high-port-count installations.
Enhanced IDC Insulation for Cat6A STP Cabling
The IDC housing-wall design is engineered to enhance Hi-Pot insulation performance. This is relevant when brands and project teams evaluate the electrical insulation behavior of connecting hardware. Specific test voltages and pass criteria should be taken from the approved product test documentation.
High-Density Patch Panels and 4PPoE Applications
CC-04-00403 is suitable for compatible high-density patch panels used in enterprise networks, data centers, telecom rooms, and smart-building infrastructure. Its shielded Cat6A construction and 4PPoE application support make it a candidate for fixed cabling serving wireless access points, IP surveillance cameras, access-control devices, and PoE-powered equipment. Final PoE performance depends on the full channel design, compatible equipment, installation quality, and applicable verification.
What Is This Product Designed For?
- High-density RJ45 patch panels and network cabinets
- Enterprise and commercial-building structured cabling
- Telecom rooms and data-center copper cabling
- Smart-building cabling and four-pair PoE device links
- OEM/ODM Category 6A shielded copper product lines
How to work with us? Please click OEM Service or Send Inquiry
1. Does CRXCONEC offer a Cat6A STP toolless keystone jack that does not require a cable tie?
Yes. CRXCONEC model CC-04-00403 features built-in cable retention, so an additional cable tie is not needed when securing the cable at the jack. Its pre-lock IDC cap supports T568A/B termination without a conventional punch-down tool. To complete the final closure correctly, CRXCONEC recommends its specially designed easy pressing tool to ensure the IDC cap is fully seated.
2. Which cable sizes fit the CRXCONEC CC-04-00403 keystone jack?
CC-04-00403 accommodates 22–24 AWG solid Ethernet cable conductors and cable outer diameters from 5.0 to 8.5 mm. Buyers should verify the cable construction and patch-panel fit before specifying the component for a project.
3. Is CRXCONEC CC-04-00403 third-party tested and suitable for 4PPoE cabling?
The Cat6A STP component performance of CC-04-00403 has been verified by GHMT laboratory, and the jack is designed to support 4PPoE applications. Request the corresponding report for the exact test standards and results; complete 4PPoE performance must also be evaluated at the channel and device level.
OEM/ODM Cat6A Keystone Jack Support
CRXCONEC supports OEM/ODM cooperation for cabling brands seeking to add a Cat6A STP toolless keystone jack to their product portfolio. Brand owners, sourcing teams, and product managers can contact CRXCONEC to review samples, compatibility, packaging, and available branding options. Customization scope and commercial terms are subject to confirmation for CC-04-00403.
Contact CRXCONEC for Product Qualification
Evaluating a Cat6A STP toolless keystone jack for your own brand or project? Contact CRXCONEC to request CC-04-00403 specifications, GHMT test documentation, sample availability, and OEM/ODM cooperation details.
Application
- Indoor
TYPE of Cabling
- Copper Solution
Product Name
- Keystone Jack
Product Category
- Category 6A
- Cat6A
Twisted Pair
- STP
- Characteristic
Suitable Cable 22–24 AWG solid conductors Cable Outside Diameter 5.0–8.5 mm Body Length 32.4 mm Mating Cycles 750 cycles with FCC-compliant RJ45 plug Mating / Unmating Force 30 N max. Retention Strength 7.7 kg between jack and plug Operating Temperature -10°C to 60°C Storage Temperature -40°C to 68°C Humidity 10%–90% RH Contact Resistance 20 mΩ, initial Insulation Resistance ≥500 MΩ at 100 Vdc for 60 s Voltage Proof Contact to contact: 1000 Vdc; contact to shield: 1500 Vdc; 60 s Current Carrying Capacity 1.0 A at 60°C (140°F) UL Voltage Rating 150 V Installation Tools CC-15-00154 dedicated tool; CC-15-00031 shared pressing tool - Material
Jack Housing Zinc die-casting with nickel plating Contact Bracket PC, transparent RJ45 Contacts Phosphor bronze with nickel plating; 50 µin gold plating on plug contact area Grounding Contact Stainless steel Cap A & B Zinc die-casting with nickel plating IDC Housing PC, white IDC Terminal Phosphor bronze with tin plating Cap PC, white Grounding Contact Block Zinc die-casting with nickel plating Spring Component Stainless steel PCB FR4, UL 94V-0 - Purchase
Price Term FOB Taiwan or Ningbo Payment Term T/T, or pay pal MOQ 3,000 pcs Packing 50Pcs/ Inner Box; 10Boxes/ Carton Lead Time 4-6 weeks after order confirmation - Video
- Related
Easy Pressing Tool For Toolless Plug & Keystone Jack
PN.CC-15-00031
The Fast and Easy RJ45 pressing tool can be used for all types of tool free RJ45 plug or keystone...
Details
Cat.6A STP 180 Degree Up-Down Cable Holder Toolless RJ45 Keystone Jack
PN. CC-04-00242
The Cat6A STP Toolless RJ45 Keystone Jack is designed for shielded structured cabling projects...
Details- File
- FAQ
Do you have keystone jack crimping tool?
Every keystone jacks are in different shapes, so the crimping tools are not allowed to work with keystone jack manufactured by others. Crxconec provide...
What Is Alien Crosstalk (AXT) and Why Does It Matter for Cat6A Testing?
For 10GBASE-T and high-density structured cabling projects, Cat6A performance is not only about cable category. Alien crosstalk control, correct component...
Download Popular Products
Cat6A STP Toolless RJ45 Keystone Jack with Cable-Tie-Free Design | CRXCONEC
Based in Taiwan since 1985, CRXCONEC eliminates the complexity of cabling brand development by providing complete structured cabling products with OEM branding, professional packaging design, and brand image services. With 35 years of manufacturing expertise and third-party certified Cat.5E through Cat.8 solutions, telecommunications providers can establish market presence in just three months while reducing development costs and staff requirements. Our one-stop service model increases development efficiency by 50% and shortens design time by 20%, allowing you to focus on market expansion rather than manufacturing operations.
CRXCONEC distinguishes itself through its proven OEM branding capabilities, rapid customization services, and commitment to delivering high-quality cabling products tailored to specific market requirements. Whether your organization needs high-density cabling solutions, waterproof industrial connectivity, fiber distribution systems, or complete cabinet and rack solutions, CRXCONEC combines decades of manufacturing expertise with prompt professional service to ensure your network infrastructure meets emerging industry standards. Contact CRXCONEC today to explore how our custom structured cabling solutions can enhance your telecommunications or data center operations.
CRXCONEC has been providing customers versatile copper cabling solutions for diverse networking needs, both with advanced technology and more than 35 years of experience, CRXCONEC ensures that each customer's requirements are met.