What kind of connectors do I need for Cat7A or Cat7 cables?
There are two well-know solutions for Cat.7A or Cat.7 connector, TERA and GG45 connector. But because of the cabling system compatibility, CRXCONEC provide RJ45 connector (8P8C) with tail clip and field termination plug for your 10 gigabits Ethernet networking system. Cat.7A cable is rated for transmission frequencies of up to 1000 MHz and support 10 Gbps. Category 7A has been designed as a standard for Gigabit Ethernet over 100 meters of structured copper cabling. In this article, you could know Cat.7A and Cat.7 basics and also referred to the compatibility of Cat.7A and Cat.7 connectors. For the sake of cutting down repetition, Cat.7A will cover with Cat.7A and Cat.7 in this article.
Well-Know Solution For Cat.7A/ 7 Connector：TERA, And GG45
TERA is a shielded connector for use with Cat.7A twisted-pair copper cables, developed by the Siemon Company. It is with a different footprint from the common RJ45 connector. Another solution is the GG45 connector, it is compatible with the normal 8p8c RJ45 plug. Moreover, GG45 connector has four additional contacts that support new high-speed Cat.7 for 600 MHz and Cat.7A for 1000 MHz networks.
Let's Get Technical!
The Category 7A copper cabling system was ratified in the ISO/IEC 11801 standard. It is designed to meet strict Class F channel specs for crosstalk and interference, it was a fully shielded cable with foil shielding surrounding individual pairs and an outer braided shield surrounding each four pairs. CRXCONEC offers Cat.7A Cable 23AWG , consisting of solid bare copper conductors for maximum performance. Highly applied in horizontal and building backbone cabling wiring and beyond IEEE 802.3an 10GBASE-T and legacy speeds.
RJ45 System Base：Choose "Right" Connector To Networking
As your active equipment uses an RJ-45 connection interface, whereas Cat.7 and 7A have two different types of non-RJ connectors (TERA, GG45) that require a hybrid patch cord to connect to ports on servers and switches. For commonly use and compaitibility, CRXCONEC has RJ45 Connector With Tail Clips (8P8C) and Filed Termination Plug for Cat.7A/ Cat.7 Larger Lan Cables.
MPTL Field Termination Plug
For MPTL application (Modular plug Termination Link), CRXCONEC Cat.7A Toolless RJ45 Connector will be a good solution, it is highly wide used in field termination and can fit with larger 22 to 26 AWG cable and support POE+ application. Toolless is refered to no need for using "RJ45 crimping tool". The superior transmission performance is over your expectation. Moreover, CRXCONEC also offer Five Directions Shielded Tool-Free RJ45 Plug can meet different working areas requirement, especially in narrow space wiring. CONTACT US NOW TO GET FREE SAMPLES！
RJ45 Connector (8P8C) With Tail Clips
The tail clips design RJ45 connectors are the economic solution for Cat.7A larger cable from 22-26 AWG, providing three different wire hole 1.2mm, 1.5mm and 1.6mm to fit with the different kinds of solid cables. You must check the insulation size before you have an order. If choosing the improper RJ45 connector when it cannot hold the wire insulation properly, it may lead to the disconnection on system. We offer two colors for choices, one is silver and the other is golden plated, all are Shielded (STP) RJ45 Connector supporting 10 gigabits Ethernet Networking. IF YOU WANT TO KNOW MORE DETAILS, FEEL FREE CONTACT US！ OR DOWNLOAD BELOW ATTACHMENT TO GET TECHNICAL.
No Need For Cat.7A. Cat.6A- A Bright Future Ahead. .
While the Cat.7A is a regulatory reality now, it can't really be referred to be a market trend. The main influence factor is the compatibility of RJ45 connection interface. While Fluke Networks recommended Cat.6A as future-proof cabling for three factors. Firstly, latest cabling standard TIA, ISO/IEC are following Cat.6A for all installations, TIA-568 generic cabling standards for commercial buildings, TIA-1179 for health care and TIA-862-B for intelligent building and so on. Secondly, PoE devices support the higher levels of power offered by Type 3 and Type 4 four-pair PoE and deploy great solutions with Cat.6A cabling. Thirdly, with the new wave of Wi-Fi, the way to support link aggregation and achieve the throughput potential of Wi-Fi 6 can be achieved by deploying two Cat 6A links to every access point. So, Category 6A cabling system is considered sufficient and will be compatible with the upgraded system for at least the next 10-15 years. CONTACT US RIGHT NOW TO GET COMPLETE SOLUTIONS！
Reference retrieved from Fluke Tester. To Get A Complete Cat6A Solution, Please Click Here.
- Related Video
- Related Products
Cat7/ Cat6A STP Toolless RJ45 connector 6.0-7.5MM
PN.CC-01-90005
Cat.7/ Cat.6A Industrial RJ45 plug is available in STP version, with special design for easy,...
Details
Cat7/ Cat6A Five Angled STP Toolless RJ45 Connector 6.0-7.5MM
PN.CC-01-90012
Cat.7/ Cat.6A Angled Toolless RJ45 plug is designed to terminate with a larger ethernet cable...
Details
UL Listed Cat6A STP RJ45 Connector With Tail Design 1.6MM
PN.CC-01-00019
Cat.6A STP 8-Pin RJ45 Connector With Tail are versatile for CCTV cables, outdoor cables and other...
Details
UL Listed Golden Cat6A STP RJ45 Connector With Tail Design 1.6MM
PN.CC-01-00022
Light golden color Cat.6A RJ45 Connector is designed with a special larger wire hole of 1.6mm...
Details
RJ45 Termination Tool OD 8.0mm For Cat.6A Plug
PN.CC-15-00001
New Designed Handy Crimping Tool is for Cat.6A Larger Cable RJ45 Connectors which supports...
Details- Files
CRX Share: Cat6A Field Termination Industrial Connector Overview
Field termination RJ45 connector application, assembly, and the performance in channel.
Download